Author(s): B. J. Dewals; S. Erpicum; P. Archambeau; S. Detrembleur; M. Pirotton
Linked Author(s): Sébastien Erpicum, Benjamin J. Dewals
Keywords: Dam break; Hydraulic modelling; Risk analysis; Complex of dams; Dam breaching; Model; Finite volume
Abstract: A complete risk analysis related to a complex of dams may involve the assessment of a large number of different scenarios of failures and dysfunctions. However, a high computation time would be needed to perform a two-dimensional analysis of the flows generated by all possible scenarios. For this reason, the present paper expounds two complementary flow models, developed to be exploited within a rational methodology for analysing the flows induced by various incidents on a complex of dams and reservoirs. The first model is the two-dimensional flow solver WOLF 2D, while the second one is a simplified lumped model, requiring very low computation time. An original analytical study is presented to demonstrate the conditions of applicability of the lumped model. This study leads to the practical conclusion that the evaluation of two non-dimensional parameters enables to assess a priori the validity of the simplified approach for any specific application. The paper also describes the combined application of both models to a practical case study involving a complex of five dams. In a first step the lumped model has been validated by comparisons with the results provided by the two-dimensional model WOLF 2D. Secondly the simplified model has been successfully applied, at a very low CPU cost, to simulate flows induced by various dysfunctions and to conduct sensitivity analysis. In conclusion, based on both theoretical developments and numerical studies, the paper provides new advances of practical relevance for dam break risk analysis.
Year: 2007