Author(s): Arthur Favrel; Tatsuya Irie; Yuya Ishii; Nak-Joong Lee; Kazuyoshi Miyagawa

Linked Author(s): Kazuyoshi Miyagawa

Keywords: No Keywords

Abstract: This paper presents an experimental and numerical investigation of the internal flow in a Francis turbine draft tube previously designed for minimizing pressure fluctuations and energy losses in off-design conditions. The design of the draft tube geometry is based on an original approach combining Design of Experiments and steady/unsteady Computational Fluid Dynamics (CFD) simulations of the draft tube internal flow. The proposed method provides new insight on the influence of the draft tube geometry on the flow dynamic behaviour on one hand and enables the determination of a geometry promoting flow stability and hydraulic performance on another hand. CFD simulations of the internal flow in the final geometry showed promising results in terms of flow stability compared with the initial geometry designed by conventional CFD-aided methods. A reduced-scale model of the prototype machine featuring the final draft tube geometry is finally installed and tested in laboratory. Tests include performance and pressure fluctuations measurements over the complete operating range. The analysis of the results shows that the draft tube flow remains globally stable over the complete part-load range with pressure fluctuations amplitude lower than 1% of the net head. It is also shown that the dominant pressure component at the runner outlet in the draft tube cone is of synchronous nature. The physical mechanisms of excitation are finally highlighted by analysis of unsteady CFD simulation results.

DOI: https://doi.org/10.1088/1755-1315/1079/1/012017

Year: 2022